Cookshack FEC750 Operator's Manual download pdf (Page 15)

Fast Eddy’s™ by Cookshack FEC300, FEC500, FEC750 Operator’s Manual, V. 14

Troubleshooting Guide

This is an initial guide for troubleshooting. If any of the following steps do not

correct your issue, contact Cookshack Customer Service at 1.800.423.0698.

Trouble

Probable Cause

Solution

Control panel does not

power up

Unit is not plugged into a

working outlet (110 VAC)

Main fuse on control panel

450° limit switch tripped

Check the outlet to

ensure it is working or

plug into alternate source

Replace fuse with 15 amp

fuse only

Unplug unit and reset the

limit switch by pushing in

on the button (FEC300

Reset is on the left side of

the smoker by the control

panel while the FEC500

and FEC750 Reset is on

the front panel below the

fuse)

Rotisserie is not rotating

with foot pedal but does

rotate during the cook

mode

Foot pedal is not plugged

in correctly

Plug in foot pedal

Rotisserie does not

function in cook mode

but does function with

foot pedal

Door switch

Ensure that the door is

closed, and the switch is

contacted

Rotisserie is not

working at any time

Rotisserie drive problem

Unplug unit

Remove

electrical/mechanical

service panel

Confirm that the chain

drive is in place and tight

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments

Cookshack FEC750 Operator's Manual Page 15

Comments to this Manuals

Related products and manuals for Ovens Cookshack FEC750